logo-invert
Can't find the right part? Why not try our engine number search
This site uses and sets "cookies" on your computer to help make this website better. You can learn more about these cookies and general information about how to change your cookie settings by visiting our privacy and cookies page. By continuing to use this site without changing your settings, you are agreeing to our use of cookies.  Click close to remove this notification. Privacy and cookie policy

Refine your results

Engine model

Product Type

1200 Series

122 results Refine Results

Fuel filter | 3611274

Perkins Eco filter element for high-efficiency filtration in secondary fuel filters on Perkins engines. With increased contamination control without giving up dirt-holding capacity for stricter component and emission requirements in newer machines. Designed to be better for the environment by eliminating the metal canister from the filter. Filter element for fitting into secondary or main fuel filter. Acrylic beads prevent bunching which can reduce filter efficiency, and maximises filtration surface area. Spiral roving reduces pleat flex and fatigue, maximising the surface area for filtration and increasing contaminant retention. A nylon centre tube prevents metal particles entering the fuel system as contaminants from filter manufacture process. Moulded end caps eliminate possible leak paths seen with glued end caps.
£20.70

Excl. VAT £17.25

£20.70

Excl. VAT £17.25

Oil filter | 4627133

Spin on oil filter 4627133 for Perkins engines, designed to meet the needs of Perkins engines by providing superior protection against particles that can make their way into the lubrication system during service or from component wear. Increasing emissions levels has resulted in more precise engineering tolerances in galleries and channels leaving less room between engine components than before, so choosing a genuine Perkins filter is more important than ever to ensure effective lubrication and cooling. Designed to reduce resistance to oil flow while maximizing filter efficiency and provide protection to the recommended oil service interval in the Operation and Maintenance Manual. Typically fitted with anti-drain back valve and by-pass valve to ensure the engine oil is in the right place during starting and operation. Supplied complete with sealing ring.
£8.94

Excl. VAT £7.45

£8.94

Excl. VAT £7.45

Oil filter | 2654407

Spin on oil filter 2654407 for Perkins engines, designed to meet the needs of Perkins engines by providing superior protection against particles that can make their way into the lubrication system during service or from component wear. Increasing emissions levels has resulted in more precise engineering tolerances in galleries and channels leaving less room between engine components than before, so choosing a genuine Perkins filter is more important than ever to ensure effective lubrication and cooling. Designed to reduce resistance to oil flow while maximizing filter efficiency and provide protection to the recommended oil service interval in the Operation and Maintenance Manual. Typically fitted with anti-drain back valve and by-pass valve to ensure the engine oil is in the right place during starting and operation. Supplied complete with sealing ring.
£5.88

Excl. VAT £4.90

£5.88

Excl. VAT £4.90

Sump drain plug | 32186405

Replacement oil sump drain plug. When draining oil always check the thread on the drain plug, stripped and crossed threads can contribute to oil leaks.
£6.12

Excl. VAT £5.10

£6.12

Excl. VAT £5.10

Safety air filter | 2652C847

Safety air filter 2652C847 for Perkins engines is designed to provide basic protection in case of a defect with the main diesel engine air filter. Providing filtration protection to remove particulates and give the best protection for your Perkins engine. Normal practice is to change the safety element every 3rd time the main filter is recommended. You can't control the environment you're working in, but you can keep your engine working longer by keeping the air used for combustion clean. Removing particulates prevents wear to vital components such as injectors and turbochargers.
£21.24

Excl. VAT £17.70

£21.24

Excl. VAT £17.70

Fuel filter assembly | 3611272

Complete secondary fuel filter head, filter, and water drain, to replace unit where is damaged. Includes drain cock. Complete with fuel filter element 3611274.
£44.70

Excl. VAT £37.25

£44.70

Excl. VAT £37.25

Glow plug | T419164

Glow plug T419164 provides in-cylinder heating to aid diesel engine starting in cold weather, reducing the cranking time to start the engine. Designed for use in heavy-duty diesel engines with long service life and short heat up time.
£8.82

Excl. VAT £7.35

£8.82

Excl. VAT £7.35

Rear oil seal housing | 2418F704

Housing gasket 2418F704 for the rear oil seal mounting for engine crankshaft, manufactured for a long reliable sealing life.
£31.14

Excl. VAT £25.95

£31.14

Excl. VAT £25.95

Starter motor | T410874

Powerful electrical motor T410874 using the latest technologies to crank and start the diesel engine. Built to withstand cold, heat, and harsh conditions to ensure all year round starting, even in cold conditions. Designed specifically to meet the needs of the power, size, cylinders, speed, and performance of your engine. Extensively tested to maximise operating life and ensure durability; our starter motors are tested to ensure they will start your engine a minimum of 36,000 times (the equivalent of four times a working day for 34 years). High-quality armature, bushings, and bearings to ensure maximum performance and long life. Strong springs and brushes for longer life to eliminate excessive arcing and brush bouncing. High performance seals to ensure water and oil tight for longer life.
£291.54

Excl. VAT £242.95

£291.54

Excl. VAT £242.95

Radiator cap | 24850073

Cap to seal the radiator to ensure a tight pressure seal, maintain correct system pressure and preventing coolant loss. Manufactured from high-quality components with relief and vacuum valves.
£22.14

Excl. VAT £18.45

£22.14

Excl. VAT £18.45

Air filter | 26510353

Primary air filter for Perkins engines 26510353 are designed to meet strict standards to provide the best value protection for your Perkins engine and normal duty diesel engine filtration applications to remove particulates. Fin diameter 130mm. You can't control the environment you're working in, but you can keep your engine working longer by keeping the air used for combustion clean. Removing particulates prevents wear to vital components such as injectors and turbochargers.
£32.28

Excl. VAT £26.90

£32.28

Excl. VAT £26.90

Oil sump strainer gasket | 3683H005

Oil sump or sump gaskets 3683H005 to mount the oil pipes within the Oil sump, ensuring the oil is circulated through the strainer and circulated around the engine. Designed to ensure an accurate oil seal, the same gaskets as used on your engine during manufacturing.
£2.70

Excl. VAT £2.25

£2.70

Excl. VAT £2.25

Glow plug | T420142

Glow plug T420142 provides in-cylinder heating to aid diesel engine starting in cold weather, reducing the cranking time to start the engine. Designed for use in heavy-duty diesel engines with long service life and short heat up time.
£9.54

Excl. VAT £7.95

£9.54

Excl. VAT £7.95

Pre-fuel filter | T412017

Filters or strainer T412017 designed to be installed on the inlet side of the fuel pump to remove the debris that could damage the fuel pump, but not cause a reduction in pressure that could lead to cavitation and damage to the fuel pump. These filters have larger micron ratings than the main or secondary fuel filter.
£33.54

Excl. VAT £27.95

£33.54

Excl. VAT £27.95

Oil filter head gasket | 3688A041

Oil filter head gasket 3688A041 to seal between the oil filter head and the block, when repairing or replacing the filter head. The same gasket as fitted during manufacturing to ensure a reliable oil seal.
£4.08

Excl. VAT £3.40

£4.08

Excl. VAT £3.40

Oil sump gasket | T420777

Oil sump gaskets T420777 to keep the engines Oil sump or sump sealed to the bottom of your engine under the arduous conditions experienced by off-road machinery. Designed to ensure an effective oil seal, the same gaskets as used on your engine during manufacturing.
£13.74

Excl. VAT £11.45

£13.74

Excl. VAT £11.45

Close