logo-invert
This site uses and sets "cookies" on your computer to help make this website better. You can learn more about these cookies and general information about how to change your cookie settings by visiting our privacy and cookies page. By continuing to use this site without changing your settings, you are agreeing to our use of cookies.  Click close to remove this notification. Privacy and cookie policy

400 Series cooling systems

48 results Refine Results

V belt - 101cm | T80109107

Perkins v-belts, also known as vee belts or wedge belts T80109107, are designed to prevent alignment and slippage problems. With greater load, the belt will tend to wedge into the groove, providing better performance. Widely used due to the reliability and strength from fibre reinforcement. When replacing fan belts check the belt tension is correct, together with the battery and all the electrical connectors. Where engines have twin belts, check to ensure the belts are of a matched length.
£9.30

Excl. VAT £7.75

£9.30

Excl. VAT £7.75

Thermostat | 145206230

Thermostats 145206230 manage the temperature of the cooling system of the engine, blocking or opening to allow the coolant to circulate the engine. Helping to ensure the engine warms us quickly on start up and then ensuring the engine temperature stays stable. Thermostats start to open at the rated temperature and should be fully open 15 to 20 degrees F above this temperature.
£16.92

Excl. VAT £14.10

£16.92

Excl. VAT £14.10

V belt - 96cm | 080109104

Perkins v-belts, also known as vee belts or wedge belts 80109104, are designed to prevent slippage and alignment problems. With greater load, the belt will tend to wedge into the groove, providing better performance. Widely used due to the reliability and strength from fibre reinforcement. When replacing fan belts check the belt tension is correct, together with the battery and all the electrical connectors. Where engines have twin belts, check to ensure the belts are of a matched length.
£8.46

Excl. VAT £7.05

£8.46

Excl. VAT £7.05

V belt - 76cm | 080109049

Perkins v-belts, also known as vee belts or wedge belts 080109049, are designed to prevent alignment and slippage problems. With greater load, the belt will tend to wedge into the groove, providing better performance. Widely used due to the reliability and strength from fibre reinforcement. When replacing fan belts check the belt tension is correct, together with the battery and all the electrical connectors. Where engines have twin belts, check to ensure the belts are of a matched length.
£4.86

Excl. VAT £4.05

£4.86

Excl. VAT £4.05

Radiator | 2485B280

Cooling package or radiator 2485B280 designed and tested specifically for the engine, to ensure effective heat rejection and long life. Sized to ensure the core is appropriate for both the engine and the application and tested over many thousands of hours to ensure perfect performance and efficient cooling. Same radiator as fitted when the engine was built in the factory, ensuring that it fits inlet/outlet points as well as the mounting points for ease of installation. Tough, rugged radiator for use in off-road, power generation sets and industrial engines. When replacing the radiator check the hoses are not brittle or cracked, and hose clips tighten correctly to ensure the coolant system has no leaks or potential for leaks.
£366.78

Excl. VAT £305.65

£366.78

Excl. VAT £305.65

V belt - 100cm | T80109105

Perkins v-belts, also known as vee belts or wedge belts T80109105, are designed to prevent slippage and alignment problems. With greater load, the belt will tend to wedge into the groove, providing better performance. Widely used due to the strength and reliability from fibre reinforcement. When replacing fan belts check the belt tension is correct, together with all the electrical connectors and the battery. Where engines have twin belts, check to ensure the belts are of a matched length.
£6.78

Excl. VAT £5.65

£6.78

Excl. VAT £5.65

Water pump | 145017380

Water pump 145017380 is a simple centrifugal pump, pushing the fluid from the pump into the engine, often belt driven from the crankshaft to circulate coolant fluid whenever the engine is running. Common signs of wear include coolant leaks, overheating of the engine, the pulley is loose and making whining sounds, or worst case steam coming from the engine. Perkins water pumps undergo extensive testing to ensure coolant flow and pressures match the engine requirements, and are designed to meet the flow and pressures within the engine using high-quality ceramic cartridge seals and sealed bearings. Typically Perkins water pumps are supplied with gasket kits.
£186.48

Excl. VAT £155.40

£186.48

Excl. VAT £155.40

V belt - 73cm | 080109083

Perkins v-belts, also known as vee belts or wedge belts 080109083, are designed to prevent alignment and slippage problems. With greater load, the belt will tend to wedge into the groove, providing better performance. Widely used due to the strength and reliability from fibre reinforcement. When replacing fan belts check the belt tension is correct, together with all the electrical connectors and the battery. Where engines have twin belts, check to ensure the belts are of a matched length.
£4.14

Excl. VAT £3.45

£4.14

Excl. VAT £3.45

Water pump pulley | 145336620

Solid water pump pulley 145336620 designed for your engine to ensure correct engine cooling and water circulation. Differences in pulley size can lead to overheating and engine strain. Exactly the same pulley as fitted to the genuine engine, making it easy to fit with the correct fitting dimensions and shaft.
£15.00

Excl. VAT £12.50

£15.00

Excl. VAT £12.50

Serpentine belt - 86.6cm | T80109143

Perkins multi-vee belts T80109143, also known as poly-vee, multi-rib or serpentine belts, are designed to prevent slippage and alignment problems. More often found on newer engines, as the wider belt can be put under greater tension without stretching. The higher tension reduces slip, which increases belt life and mechanical efficiency. When replacing fan belts check the belt tension is correct, together with the battery and all the electrical connectors.
£19.20

Excl. VAT £16.00

£19.20

Excl. VAT £16.00

V belt - 77cm | T80109108

Perkins v-belts, also known as vee belts or wedge belts T80109108, are designed to prevent slippage and alignment problems. With greater load, the belt will tend to wedge into the groove, providing better performance. Widely used due to the reliability and strength from fibre reinforcement. When replacing fan belts check the belt tension is correct, together with the battery and all the electrical connectors. Where engines have twin belts, check to ensure the belts are of a matched length.
£5.10

Excl. VAT £4.25

£5.10

Excl. VAT £4.25

V belt - 99cm | T80109080

Perkins v-belts, also known as vee belts or wedge belts T80109080, are designed to prevent slippage and alignment problems. With greater load, the belt will tend to wedge into the groove, providing better performance. Widely used due to the reliability and strength from fibre reinforcement. When replacing fan belts check the belt tension is correct, together with the battery and all the electrical connectors. Where engines have twin belts, check to ensure the belts are of a matched length.
£7.32

Excl. VAT £6.10

£7.32

Excl. VAT £6.10

Radiator fan | U45307130

Engine cooling system radiator fans U45307130 move the air aiding the cooling effect on the radiator, to ensure your engine runs at the right temperature. Perkins designs the fans to provide efficient cooling and low noise by selecting the number, shape and blade material, to move the right amount of air to deliver effective airflow. Every fan is selected and tested with thousands of hours of testing to deliver the right level of cooling, especially important as the higher level of emissions such as in Tier 4 higher levels of heat rejection are required.
£54.96

Excl. VAT £45.80

£54.96

Excl. VAT £45.80

Water pump pulley | 145336490

Solid water pump pulley 145336490 designed for your engine to ensure correct water circulation and engine cooling. Differences in pulley size can lead to overheating and engine strain. Exactly the same pulley as fitted to the genuine engine, making it easy to fit with the correct shaft and fitting dimensions.
£24.54

Excl. VAT £20.45

£24.54

Excl. VAT £20.45

Radiator fan | 145306880

Engine cooling system radiator fans 145306880 move the air aiding the cooling effect on the radiator, to ensure your engine runs at the right temperature. Perkins designs the fans to provide low noise and efficient cooling by selecting the number, shape and blade material, to move the right amount of air to deliver effective airflow. Every fan is selected and tested with thousands of hours of testing, especially important as the higher level of emissions such as in Tier 4 higher levels of heat rejection are required, to deliver the right level of cooling.
£56.76

Excl. VAT £47.30

£56.76

Excl. VAT £47.30

Radiator fan | 145306520

Engine cooling system radiator fans 145306520 move the air aiding the cooling effect on the radiator, to ensure your engine runs at the right temperature. Perkins designs the fans to provide low noise and efficient cooling by selecting the number, shape and blade material, to deliver effective airflow by moving the right amount of air. Every fan is selected and tested with thousands of hours of testing, especially important as the higher level of emissions such as in Tier 4 higher levels of heat rejection are required, to deliver the right level of cooling.
£38.94

Excl. VAT £32.45

£38.94

Excl. VAT £32.45

Close