logo-invert
This site uses and sets "cookies" on your computer to help make this website better. You can learn more about these cookies and general information about how to change your cookie settings by visiting our privacy and cookies page. By continuing to use this site without changing your settings, you are agreeing to our use of cookies.  Click close to remove this notification. Privacy and cookie policy

402 Series engines

53 results Refine Results

Dipstick | 198416861

Enables checking of the oil level within the engine using the dipstick 198416861, includes a seal to prevent the oil becoming contaminated. Depending on the design of the engine, application engine models and sump volume require different design of dipstick, so it is important to have the right length of dipstick and position. Coloured handle for easy to read level indicator and easy recognition. Remember to let the oil settle with the engine off, on level ground for 5 to 10 minutes before checking the oil level. Overfilling is as bad as under filling, always maintain the oil level according to the Perkins Operation and Maintenance Manual.
£5.76

Excl. VAT £4.80

£5.76

Excl. VAT £4.80

Oil filter | 140517030

Spin on oil filter 140517030 for Perkins engines, designed to meet the needs of Perkins engines by providing superior protection against particles that can make their way into the lubrication system during service or from component wear. Increasing emissions levels has resulted in more precise engineering tolerances in galleries and channels leaving less room between engine components than before, so choosing a genuine Perkins filter is more important than ever to ensure effective lubrication and cooling. Designed to reduce resistance to oil flow while maximizing filter efficiency and provide protection to the recommended oil service interval in the Operation and Maintenance Manual. Typically fitted with anti-drain back valve and by-pass valve to ensure the engine oil is in the right place during starting and operation. Supplied complete with sealing ring.
£5.10

Excl. VAT £4.25

£5.10

Excl. VAT £4.25

Pre-fuel filter | 130306360

Filters or strainers designed to be installed on the inlet side of the fuel pump to remove the debris that could damage the fuel pump, but not cause a reduction in pressure that could lead to cavitation and damage to the fuel pump. These filters have larger micron ratings than the main or secondary fuel filter.
£7.44

Excl. VAT £6.20

£7.44

Excl. VAT £6.20

V belt - 76cm | 080109049

Perkins v-belts, also known as vee belts or wedge belts 080109049, are designed to prevent alignment and slippage problems. With greater load, the belt will tend to wedge into the groove, providing better performance. Widely used due to the reliability and strength from fibre reinforcement. When replacing fan belts check the belt tension is correct, together with the battery and all the electrical connectors. Where engines have twin belts, check to ensure the belts are of a matched length.
£4.86

Excl. VAT £4.05

£4.86

Excl. VAT £4.05

Timing case cover gasket | 165996500

The timing case cover gasket 165996500 is the working seal between the timing cover and the engine block, preventing contaminants out of the gear shaft area and ensuring an effective fluid seal, where symptoms of wear or failure include an oil or coolant leak. Every gasket is the same as used on genuine manufacturing and designed to ensure a perfect fit and effective sealing. When the timing cover is removed to correct a leak, the timing components should be thoroughly inspected and replaced, if necessary.
£8.88

Excl. VAT £7.40

£8.88

Excl. VAT £7.40

Glow plug | 185366250

Glow plugs provide in-cylinder heating to aid diesel engine starting in cold weather, reducing the cranking time to start the engine. Designed for use in heavy-duty diesel engines with short heat up time and long service life.
£26.46

Excl. VAT £22.05

£26.46

Excl. VAT £22.05

Rear oil seal | 198636080

Rear end oil seal 198636080 for engine crankshaft, engineered to ensure a perfect seal, maximum contamination exclusion and deliver a long lifetime of load endurance and seal efficiency.
£26.64

Excl. VAT £22.20

£26.64

Excl. VAT £22.20

Pre-fuel filter | 130366040

Filters or strainers designed to be installed on the inlet side of the fuel pump to remove the debris that could damage the fuel pump, but not cause a reduction in pressure that could lead to cavitation and damage to the fuel pump. These filters have larger micron ratings than the main or secondary fuel filter.
£7.44

Excl. VAT £6.20

£7.44

Excl. VAT £6.20

Front oil seal | 198636090

Front end oil seal for engine crankshaft, engineered to ensure a perfect seal, maximum contamination exclusion and deliver a long lifetime of load endurance and seal efficiency.
£6.12

Excl. VAT £5.10

£6.12

Excl. VAT £5.10

Lift pump | 130506351

Primary fuel pump to move the fuel from the tank into the engine fuel system. Designed to ensure the correct level of flow and pressure into the fuel system, correct flow rate and pressure are critical to prevent the issues of cavitation and vaporisation that can lead to implosion and damage to surfaces. Perkins fuel pumps are carefully selected during our engine design to provide the pressure and flow required for the whole fuel system and tested for many thousands of running hours to ensure smooth running and maximum performance and power. Uses high-performance seals to ensure long life, and deliver correct pressure whatever the conditions.
£40.56

Excl. VAT £33.80

£40.56

Excl. VAT £33.80

Water temperature sensor | 385720500

The water or coolant temperature sensor 385720500 is used to measure the temperature of the engine coolant, which can then be fed back to the ECU, to adjust the fuel ignition and timing. Helping to ensure more fuel is supplied when the engine is cold or less when the engine is warm. Alternatively, some engines may use this as an indicator to switch on an electric fan or provide a reading for a dashboard readout. Temperature plays a vital role in engine performance calculations; a sensor failure can quickly lead to issues such as; poor fuel economy, black smoke or overheating. Perkins temperature sensors are carefully selected to they are durable and reliable to give your engine long, productive life.
£37.86

Excl. VAT £31.55

£37.86

Excl. VAT £31.55

Throttle solenoid | 185206085

Replacement electric / magnetic throttle solenoid designed to aid engine idle control when additional loads placed on the engine, designed to be rugged and tough for off-road industrial applications.
£109.32

Excl. VAT £91.10

£109.32

Excl. VAT £91.10

Pre-fuel filter assembly | 130306041

Complete primary pre-filter / water separator with head, bowl and water drain, to replace unit where bowl and unit are damaged. Includes drain cock and bowl and filter 130366040.
£35.82

Excl. VAT £29.85

£35.82

Excl. VAT £29.85

Oil pressure sensor | U85246210

Oil pressure sensors U85246210 within the engine are designed to assist in engine control and can be used to provide a visible warning to the operator when oil levels are low. Without the proper amount of oil, your engine will sustain major damage. Calibrated to the oil pressure the engine requires for effective oil circulation.
£14.58

Excl. VAT £12.15

£14.58

Excl. VAT £12.15

Oil pressure sensor | 185246060

Oil pressure sensors 185246060 within the engine can be used to provide a visible warning to the operator when oil levels are low and are designed to assist in engine control. Without the proper amount of oil, your engine will sustain major damage. Calibrated to the oil pressure the engine requires for effective oil circulation.
£10.02

Excl. VAT £8.35

£10.02

Excl. VAT £8.35

Sump drain plug | T10109238

Replacement oil sump drain plug T10109238. When draining oil always check the thread on the drain plug, stripped and crossed threads can contribute to oil leaks.
£3.72

Excl. VAT £3.10

£3.72

Excl. VAT £3.10

Close