logo-invert
Can't find the right part? Why not try our engine number search
This site uses and sets "cookies" on your computer to help make this website better. You can learn more about these cookies and general information about how to change your cookie settings by visiting our privacy and cookies page. By continuing to use this site without changing your settings, you are agreeing to our use of cookies.  Click close to remove this notification. Privacy and cookie policy

Refine your results

Engine model

Product Type

6.354

113 results Refine Results

Fuel filter | 26561117

Perkins secondary cartridge fuel filter protects the fuel system from particulates and water found in fuel, especially in off-road applications. Metal construction resists burst and pulse pressure. Easy to assemble installation. Water drain fits to the bottom of the filter and secures using base. Supplied with all the required seals.
£3.90

Excl. VAT £3.25

£3.90

Excl. VAT £3.25

Fuel filter assembly | 2656615

Complete secondary fuel filter head, filter, and water drain, to replace unit where is damaged. Includes drain cock. Complete with fuel filter 26561117.
£39.66

Excl. VAT £33.05

£39.66

Excl. VAT £33.05

Fuel filter assembly | 2656613

Complete secondary fuel filter head, filter, and water drain, to replace unit where is damaged. Includes drain cock. Complete with fuel filter 26561117.
£29.64

Excl. VAT £24.70

£29.64

Excl. VAT £24.70

Oil filter | 2654403

Spin on oil filter 2654403 for Perkins engines, designed to meet the needs of Perkins engines by providing superior protection against particles that can make their way into the lubrication system during service or from component wear. Increasing emissions levels has resulted in more precise engineering tolerances in channels and galleries leaving less room between engine components than before, so choosing a genuine Perkins filter is more important than ever to ensure effective cooling and lubrication. Designed to maximise filter efficiency while reducing resistance to oil flow and provide protection to the recommended oil service interval in the Operation and Maintenance Manual. Typically fitted with by-pass valve and anti-drain back valve to ensure the engine oil is in the right place during starting and operation. Supplied complete with sealing ring.
£5.46

Excl. VAT £4.55

£5.46

Excl. VAT £4.55

Oil filter | 2654407

Spin on oil filter 2654407 for Perkins engines, designed to meet the needs of Perkins engines by providing superior protection against particles that can make their way into the lubrication system during service or from component wear. Increasing emissions levels has resulted in more precise engineering tolerances in galleries and channels leaving less room between engine components than before, so choosing a genuine Perkins filter is more important than ever to ensure effective lubrication and cooling. Designed to reduce resistance to oil flow while maximizing filter efficiency and provide protection to the recommended oil service interval in the Operation and Maintenance Manual. Typically fitted with anti-drain back valve and by-pass valve to ensure the engine oil is in the right place during starting and operation. Supplied complete with sealing ring.
£5.88

Excl. VAT £4.90

£5.88

Excl. VAT £4.90

Sump drain plug | 32186405

Replacement oil sump drain plug. When draining oil always check the thread on the drain plug, stripped and crossed threads can contribute to oil leaks.
£6.12

Excl. VAT £5.10

£6.12

Excl. VAT £5.10

Pre-fuel filter assembly | 2656088

Complete primary water separator with head, bowl and water drain, to replace unit where bowl and unit are damaged. Includes drain cock and bowl.
£33.30

Excl. VAT £27.75

£33.30

Excl. VAT £27.75

V belt - 132cm | 2614B654

Perkins v-belts, also known as vee belts or wedge belts 2614B654, are designed to prevent alignment and slippage problems. With greater load, the belt will tend to wedge into the groove, providing better performance. Widely used due to the strength and reliability from fibre reinforcement. When replacing fan belts check the belt tension is correct, together with all the electrical connectors and the battery. Where engines have twin belts, check to ensure the belts are of a matched length.
£27.96

Excl. VAT £23.30

£27.96

Excl. VAT £23.30

V belt - 131cm | 2614B653

Perkins v-belts, also known as vee belts or wedge belts 2614B653, are designed to prevent slippage and alignment problems. With greater load, the belt will tend to wedge into the groove, providing better performance. Widely used due to the reliability and strength from fibre reinforcement. When replacing fan belts check the belt tension is correct, together with the battery and all the electrical connectors. Where engines have twin belts, check to ensure the belts are of a matched length.
£24.18

Excl. VAT £20.15

£24.18

Excl. VAT £20.15

Water temperature sensor | 2755882

The coolant or water temperature sensor 2755882 is used to measure the temperature of the engine coolant, which can then be fed back to the ECU, to adjust the fuel ignition and timing. Helping to ensure less fuel is supplied when the engine is warm or more when the engine is cold. Alternatively, some engines may use this as an indicator to switch on an electric fan or provide a reading for a dashboard readout. Temperature plays a vital role in engine performance calculations; a sensor failure can quickly lead to issues such as; poor fuel economy, black smoke or overheating. Perkins temperature sensors are carefully selected to they are durable and reliable to give your engine long, productive life.
£36.12

Excl. VAT £30.10

£36.12

Excl. VAT £30.10

Intake heater | 2666108

Air intake heaters, also known as a grid or manifold heaters are used to pre-heat the combustion air to the required temperature to aid cold starting. Used as an alternative to glow plugs to provide quick starting in cold weather. Also, can be used to reduce white smoke (cold emissions), engine wear and battery/fuel consumption during start-up
£19.68

Excl. VAT £16.40

£19.68

Excl. VAT £16.40

V belt - 127cm | 2614B650

Perkins v-belts, also known as vee belts or wedge belts 2614B650, are designed to prevent alignment and slippage problems. With greater load, the belt will tend to wedge into the groove, providing better performance. Widely used due to the strength and reliability from fibre reinforcement. When replacing fan belts check the belt tension is correct, together with all the electrical connectors and the battery. Where engines have twin belts, check to ensure the belts are of a matched length.
£25.62

Excl. VAT £21.35

£25.62

Excl. VAT £21.35

Valve cover gasket | 21826362

Valve cover or rocker gaskets 21826362 should be changed whenever the tappets are adjusted at the appropriate service interval. Re-using gaskets and seals is not recommended. Perkins seals and gaskets are designed to fit the rocker cover and cylinder head precisely, using specialized materials that deliver an effective seal to prevent oil leaks according to the tightness of the rocker cover bolts.
£11.16

Excl. VAT £9.30

£11.16

Excl. VAT £9.30

Front oil seal | 2418F437

Front end oil seal 2418F437 for engine crankshaft, engineered to ensure a perfect seal, maximum contamination exclusion and deliver a long lifetime of load endurance and seal efficiency.
£8.10

Excl. VAT £6.75

£8.10

Excl. VAT £6.75

Thermostat | 2485613

Thermostats 2485613 manage the temperature of the cooling system of the engine, blocking or opening to allow the coolant to circulate the engine. Helping to ensure the engine warms us quickly on start up and then ensuring the engine temperature stays stable. Thermostats start to open at the rated temperature and should be fully open 15 to 20 degrees F above this temperature.
£9.30

Excl. VAT £7.75

£9.30

Excl. VAT £7.75

V belt - 133cm | 2614B655

Perkins v-belts, also known as vee belts or wedge belts 2614B655, are designed to prevent slippage and alignment problems. With greater load, the belt will tend to wedge into the groove, providing better performance. Widely used due to the strength and reliability from fibre reinforcement. When replacing fan belts check the belt tension is correct, together with all the electrical connectors and the battery. Where engines have twin belts, check to ensure the belts are of a matched length.
£24.48

Excl. VAT £20.40

£24.48

Excl. VAT £20.40

Close