logo-invert
Can't find the right part? Why not try our engine number search
This site uses and sets "cookies" on your computer to help make this website better. You can learn more about these cookies and general information about how to change your cookie settings by visiting our privacy and cookies page. By continuing to use this site without changing your settings, you are agreeing to our use of cookies.  Click close to remove this notification. Privacy and cookie policy

Gaskets play a critical role in enabling cylinder head and the cylinder block seals, using high technology metals and composites for a gas and liquid tight seal to maintain working pressures. Seals are also found at the bottom end of the engine to keep the rotating components well lubricated with engine oil. Leaking seals and gaskets not only result in the loss of liquids, they can cause poor starting (due to insufficient compression), increased oil or coolant consumption, loss of power, high fuel consumption, unacceptable smoke, increased cylinder bore wear, as well as potential engine failure.

Refine your results

Engine family

Engine model

Major and cylinders

Gaskets and seals majors and cylinders

219 results Refine Results

Timing case cover gasket | U65996600

The timing case cover gasket U65996600 is the working seal between the timing cover and the engine block, ensuring an effective fluid seal, and preventing contaminants out of the gear shaft area, where symptoms of wear or failure include a coolant or oil leak. Every gasket is the same as used on genuine manufacturing and designed to ensure a perfect fit and effective sealing. When the timing cover is removed to correct a leak, the timing components should be thoroughly inspected and replaced, if necessary.
£6.84

Excl. VAT £5.70

£6.84

Excl. VAT £5.70

Rear oil seal | 198636080

Rear end oil seal 198636080 for engine crankshaft, engineered to ensure a perfect seal, maximum contamination exclusion and deliver a long lifetime of load endurance and seal efficiency.
£26.64

Excl. VAT £22.20

£26.64

Excl. VAT £22.20

Timing case gasket | U65996590

The timing case gasket U65996590 is the working seal between the timing cover and the engine block, preventing contaminants out of the gear shaft area and ensuring an effective fluid seal, where symptoms of wear or failure include an oil or coolant leak. Every gasket is the same as used on genuine manufacturing and designed to ensure a perfect fit and effective sealing. When the timing cover is removed to correct a leak, the timing components should be thoroughly inspected and replaced, if necessary.
£15.90

Excl. VAT £13.25

£15.90

Excl. VAT £13.25

Timing case cover gasket | 165996500

The timing case cover gasket 165996500 is the working seal between the timing cover and the engine block, preventing contaminants out of the gear shaft area and ensuring an effective fluid seal, where symptoms of wear or failure include an oil or coolant leak. Every gasket is the same as used on genuine manufacturing and designed to ensure a perfect fit and effective sealing. When the timing cover is removed to correct a leak, the timing components should be thoroughly inspected and replaced, if necessary.
£8.88

Excl. VAT £7.40

£8.88

Excl. VAT £7.40

Front oil seal | 2418F437

Front end oil seal 2418F437 for engine crankshaft, engineered to ensure a perfect seal, maximum contamination exclusion and deliver a long lifetime of load endurance and seal efficiency.
£8.10

Excl. VAT £6.75

£8.10

Excl. VAT £6.75

Idler cover gasket | 3682H003

Idler cover gasket 3682H003 for fitting onto timing case to provide a tight oil seal for effective operation. Designed and manufactured for a long and reliable life.
£4.56

Excl. VAT £3.80

£4.56

Excl. VAT £3.80

Valve cover gasket | 21826362

Valve cover or rocker gaskets 21826362 should be changed whenever the tappets are adjusted at the appropriate service interval. Re-using gaskets and seals is not recommended. Perkins seals and gaskets are designed to fit the rocker cover and cylinder head precisely, using specialized materials that deliver an effective seal to prevent oil leaks according to the tightness of the rocker cover bolts.
£11.16

Excl. VAT £9.30

£11.16

Excl. VAT £9.30

Front oil seal | 198636160

Front end oil seal for engine crankshaft, engineered to ensure a perfect seal, maximum contamination exclusion and deliver a long lifetime of load endurance and seal efficiency.
£7.32

Excl. VAT £6.10

£7.32

Excl. VAT £6.10

Front oil seal | 198636090

Front end oil seal for engine crankshaft, engineered to ensure a perfect seal, maximum contamination exclusion and deliver a long lifetime of load endurance and seal efficiency.
£6.12

Excl. VAT £5.10

£6.12

Excl. VAT £5.10

Rear oil seal housing | 2418F704

Housing gasket 2418F704 for the rear oil seal mounting for engine crankshaft, manufactured for a long reliable sealing life.
£31.14

Excl. VAT £25.95

£31.14

Excl. VAT £25.95

Timing case cover gasket | 3681P047

The timing case cover gasket 3681P047 is the working seal between the timing cover and the engine block, ensuring an effective fluid seal, and preventing contaminants out of the gear shaft area, where symptoms of wear or failure include a coolant or oil leak. Every gasket is the same as used on genuine manufacturing and designed to ensure a perfect fit and effective sealing. When the timing cover is removed to correct a leak, the timing components should be thoroughly inspected and replaced, if necessary.
£28.50

Excl. VAT £23.75

£28.50

Excl. VAT £23.75

Timing case throttle lever gasket | U65996640

Mounting gasket 36861466 for the throttle lever assembly to the timing case, designed and manufactured for a long and reliable life.
£0.72

Excl. VAT £0.60

£0.72

Excl. VAT £0.60

Rear oil seal | 198636170

Rear end oil seal 198636170 for engine crankshaft, engineered to ensure a perfect seal, maximum contamination exclusion and deliver a long lifetime of load endurance and seal efficiency.
£35.64

Excl. VAT £29.70

£35.64

Excl. VAT £29.70

Valve cover gasket | 052109061

Valve cover or rocker gaskets 52109061 should be changed whenever the tappets are adjusted at the appropriate service interval. Re-using gaskets and seals is not recommended. Perkins seals and gaskets are designed to fit the rocker cover and cylinder head precisely, using specialized materials that deliver an effective seal to prevent oil leaks according to the tightness of the rocker cover bolts.
£5.52

Excl. VAT £4.60

£5.52

Excl. VAT £4.60

Timing case gasket | U65996570

The timing case gasket U65996570 is the working seal between the timing cover and the engine block, preventing contaminants out of the gear shaft area and ensuring an effective fluid seal, where symptoms of wear or failure include an oil or coolant leak. Every gasket is the same as used on genuine manufacturing and designed to ensure a perfect fit and effective sealing. When the timing cover is removed to correct a leak, the timing components should be thoroughly inspected and replaced, if necessary.
£4.38

Excl. VAT £3.65

£4.38

Excl. VAT £3.65

Timing case cover gasket | 21826410

The timing case cover gasket 21826410 is the working seal between the timing cover and the engine block, preventing contaminants out of the gear shaft area and ensuring an effective fluid seal, where symptoms of wear or failure include an oil or coolant leak. Every gasket is the same as used on genuine manufacturing and designed to ensure a perfect fit and effective sealing. When the timing cover is removed to correct a leak, the timing components should be thoroughly inspected and replaced, if necessary.
£35.94

Excl. VAT £29.95

£35.94

Excl. VAT £29.95

Close